Home Forum Sponsors Careers Contact Us
Login  |  Register
Download Latest Newsletter (Issue 179)
Europe North America Asia Rest of the World Global News & Policies
Air Products Signs Two Agreements to Move Texas Carbon Capture and Sequestration Project Forward

Friday, May 27, 2011

Air Products (NYSE: APD) announced today it has signed agreements with Valero Energy Corporation and Denbury Onshore, LLC to proceed with a planned carbon capture and sequestration project in Port Arthur, Texas. The carbon dioxide (CO2) to be captured by Air Products will be delivered by Air Products via a pipeline owned by Denbury Green Pipeline-Texas to Denbury Onshore beginning in late 2012. The CO2 will be used by Denbury Onshore in enhanced oil recovery operations.
"The signing of these agreements is a key step in moving this important project forward. Air Products has been an integral team member of several carbon capture projects around the world. We are a technology solutions provider and at Port Arthur we will have the opportunity to demonstrate these capabilities at a large industrial scale," said Wilbur Mok, vice president, North America Tonnage Gases for Air Products. "We look forward to working with Denbury and thank Valero for its cooperation and support at the Port Arthur location." Details on Air Products' CO2 purification technologies can be found at
Air Products will design, construct and operate a state-of-the-art system to capture CO2 from its two steam methane reformers (SMR) located within the Valero Refinery in Port Arthur. The CO2 removal technology will be retrofitted to the SMRs, which produce hydrogen to assist in the making of cleaner burning transportation fuels by refinery customers on Air Products' Gulf Coast hydrogen pipeline network. Approximately one million tons of CO2 annually will be recovered, purified by Air Products, and delivered by Air Products via a pipeline owned by Denbury Green Pipeline-Texas, LLC for injection into Denbury Onshore's enhanced oil recovery projects in Texas.
In June 2010, Air Products announced it was selected to receive $253 million in Phase 2 funding from the United States Department of Energy (DOE) through the National Energy Technology Laboratory under the Industrial Carbon Capture and Sequestration (ICCS) Program for this ICCS project. It has since received an additional $30 million from DOE for the project. The American Recovery and Reinvestment Act funds are being used for final engineering, design, construction and project operation through September 2015. Air Products' project was the only industrial gas company led undertaking selected by DOE and one of only three projects receiving Phase 2 funds. DOE is providing a total of $284 million, including the funding utilized for Phase 1, or 66 percent of the over $400 million project.
DOE said in its Phase 2 selection announcement that successful development of advanced technologies and innovative concepts reducing CO2 atmospheric emissions is a key objective of the Obama Administration's efforts to help mitigate the effects of climate change. The Phase 2 projects selected were aimed at testing large-scale industrial carbon capture and storage (CCS), an important step in moving CCS technology toward eventual commercial deployment. (Air Products)
Your Name:
Verification Code:  
  The comments submitted do not represent CaptureReady's standpoint, is not responsible for any of those, and entitled to deal with them.
Search News
Sponsors | Careers | Contact Us | Privacy | Terms of Use
© 2008~2010 LINKSCHINA. All rights reserved       ICP:08005527